Connecting the scanner using an IEEE 1394 interface cable

Note:

❏IEEE 1394 interface connection is not supported by Windows 98.❏Prepare an IEEE 1394 interface cable before performing this operation.

1.Connect one end of an IEEE 1394 interface cable to the IEEE 1394 port on the back of the scanner.

2.Connect the other end of the cable to the IEEE 1394 port on your computer, or another IEEE 1394 device.

If there are already IEEE 1394 devices connected to your computer, connect the scanner so that it is the last IEEE 1394 device in the daisy chain.

Note:

Basically, use an IEEE 1394 interface cable that comes with 2 six-pin connectors at each end. If IEEE 1394 devices with four-pin connectors are used in a daisy chain or tree, you need to use a 6:4 converter cable.

Setting Up the Scanner

13