❏Except as specifically explained in this Setup Guide and the Online Reference Guide, do not attempt to service the scanner yourself.

❏Unplug the scanner and refer servicing to qualified service personnel under the following conditions:

❏If the power cord or plug is damaged.

❏If liquid has entered the scanner.

❏If the scanner has been dropped or the case damaged.

❏If the scanner does not operate normally or exhibits a distinct change in performance. (Do not adjust controls that are not covered by the operating instructions.)

❏For Hong Kong and Singapore users:

Replace fuses only with those with of the correct size and rating.

❏If you plan to use the scanner in Germany, observe the following:

To provide adequate short-circuit protection and over-current protection for this scanner, the building installation must be protected by a 10 or 16 Amp circuit breaker.

Note for German-speaking users:

Bei Anschluss des Scanners an die Stromversorgung muss sichergestellt werden, dass die Gebäudeinstallation mit einer 10A- oder 16 A-Sicherung abgesichert ist.

2Safety Instructions