Epson LQ-1500 Inserting pin-feedpaper, Figure 3-5. Printer parts used with pin-feedpaper, 5. Make sure the platen release lever is closed (back)

Figure 3-5.Printer parts used with pin-feed paper

4.Set the paper support skids evenly from the approximate center of the paper width (as shown in Figure 3-6). This helps the paper feed smoothly.

Note: If you are using narrow or standard width paper, you must insert it at the far left of the platen (just as you did with single- sheet paper).

5. Make sure the platen release lever is closed (back).

Inserting pin-feed paper

Now that you have prepared the printer, you can load the pin-feed paper by following these steps:

1.Make sure you have a clean top edge. Insert the pin-feed paper into the paper guide slit at the rear of the platen as shown in Figure 3-6. (If the sheet guide unit is installed, slide the paper underneath it.)

37