Epson LQ-2080 Replacing the Ribbon Cartridge

Replacing the Ribbon Cartridge

Remove the separator from the new

ribbon cartridge and discard it. Then

turn the ribbon-tightening knob in the

direction of the arrow to remove any

slack in the ribbon.

Hold the cartridge with the ribbon-

tightening knob up. Fit the cartridge’s

two front notches (➀) over the small

pegs on each side of the printer as

shown. Then lay the cartridge flat so

that the rear notches (➁) fit over the

corresponding pegs.

ribbon-tightening knob

separator

Contents

Main Guide Contents User's Guide Loading Continuous Paper Onto the Rear Push Tractor Q Page Loading Continuous Paper Onto the Front Push Tractor Q 3 4 Q Loading Continuous Paper Onto the Front Push Tractor Removing the Printed Document From the Push Tractor Q Removing Continuous Paper With Labels Removing the Printed Document From the Push Tractor Removing Continuous Paper With Labels w 1 2 3 4 5 Q Replacing the Ribbon Cartridge 8 9 10 Page Replacing the Ribbon Cartridge 4 5 Page If Your Printer Stops Printing Unexpectedly... The printer stops printing and the Paus e light is on. The Paper Out and Pause lights are on. The Paper Out light is flashing and the Pause light is on.