16
If Your Printer Stops Printing Unexpectedly... Check the printer’s cont rol panel lights and follo w the appropriate instruc tions below. For more
information, see Chapter 7 of your User’s Guide.
The printer stops printing and the Paus e light is on.
Cause Solution
The printer is paused. Press the Pause button to resume printing.
You moved the paper release lever while
paper from another paper source was in
the paper path.
Move the paper release lever back to the appropriate
position and press the Load/Eject butto n to feed the paper
out of the paper path. Then set the lev er to t he posit i on you
want to use. Press the Pause button to turn off the Pause
light, if necessary.*
*If you are using the pull tractor , see your
User’s Guide
for instructions.
The Paper Out and Pause lights are on.
Cause Solution
No paper is loaded in the selected paper
source or paper is not loaded correctly. Load paper in the printer, then press the Pause button to
turn off the Pause light, if necessary.
Paper is jammed in the printer. See ”Clearing Paper Jams” on page 13.
The Paper Out light is flashing and the Pause light is on.
Cause Solution
Continuous paper is not fed to the standby
position. Tear off the printed document at the perforation; then press
the Load/Eject button. The printer feeds the paper to the
standby position. Press the Pause button to turn off the
Pause light.
A single sheet of paper is not fully ejected. Press the Load/Eject button to eject the sheet. Then press
the Pause button to turn off the Pause light, if necessary.
Paper is jammed in the printer. See ”Clearing Paper Jams” on page 13.
Printed in Japan 98.xx.xx