2
Loading Continuous Paper Onto the Rear Push Tractor
Open the paper guide cover and
remove the paper guide.
Open both sprocket covers, and fit the
first four holes of the p aper, printable
side down, over the tractor pins. Then
close the sprocket covers.
Note:
Load continuous paper that has a clean, straight
edge to avoid paper jams.
1
paper guide
paper guide cover
2
QTo remove paper from the paper path,
press the Load/Eject button. The
printer feeds the paper to the standby
position, where you can remove the
paper from the printer.
QIf you load continuous paper which is a
different size or thickness, y ou need to
adjust the position of the sprocket units
or change the paper th ickness lever
setting. See Chapter 2 of the User’s Guide
for instructions.
To load continuous paper onto the rear push tractor, follow the steps below.
cCaution:
Do not load continuous paper with labels onto the rear push tractor; the labels may come off the
backing sheet and jam the printer. To use continuous paper with labels, you need to purchase
the optional tractor unit (C80032✽).