4
Loading Continuous Paper Onto the Front Push Tractor
Open the front paper guide by pulling
the tab at the center of it, and then
remove the guide by gr asping both
sides and pulling it straight o ut of the
printer.
Open both sprocket covers, and fit the
first four holes of the p aper, printable
side up, over the tractor pins. Then
close the sprocket covers.
Note:
Load continuous paper that has a clean, straight
edge to avoid paper jams.
1
tab
2
QTo remove any paper from the paper
path, press the Load/Eject button. The
printer feeds the paper into the standby
position, where you can remove the
paper from the printer.
QIf you load continuous paper of a
different size or thickness, y ou need to
adjust the position of the sprockets or
change the paper thickness lever setting.
See Chapter 2 of the User’s Guide for
instructions.
To load continuous paper onto the front push tractor, follow these steps.
Note:
To use the front push tractor, you need to purchase the optional tractor unit (C80032✽) and install it in
the front push position.