EPSON
8.Attach the front paper guide by sliding it along the printer’s mounting slots as shown below. Then close the front paper guide.
9.Slide the edge guides to the middle of the top paper guide. Make sure that the printer cover and the paper guide cover are closed.
edge guides
Note:
Always close the printer cover before printing. The printer does not print when the cover is open.
10.Turn on the printer. You may need to check and change the printer driver settings. When the printer receives data, it automatically loads the paper and starts printing. The printed pages are fed over the paper guide toward the back of the printer.
11.After you finish printing, follow the steps in the next section to tear off your printed document.
If the first printed line on your page appears too high or low, you can fix this using the micro adjust feature as described in “Adjusting the
Caution:
Never use the knob to adjust the
Removing the printed document from the front push tractor
To remove the printed document, follow these steps:
1.Make sure the Tear/Off Bin lights are flashing. (This indicates that your paper is at the current
2.Open the paper guide cover, and tear off the printed document using the
Note:
If your paper’s perforation is not properly aligned with the
Caution:
Never use the knob to adjust the
3. Close the paper guide cover.
When you resume printing, the printer automatically feeds the paper back to the
14 - EPSON | 2/99 |