EPSON
7.Make sure your paper has a clean, straight leading edge. Open the sprocket covers. Fit the first holes of the paper over the sprocket pins and then close the sprocket covers. Slide the right sprocket unit to remove any slack in the paper and lock it in place.
n
To separate the incoming paper from the printed paper, attach the paper guide. Hold it horizontally and fit its notches over the printer’s mounting posts. Then slide the paper guide toward the back of the printer until you feel it click
Slide the left edge guide to the center until it stops at the
10.Attach the printer cover and adjust the paper position with the knob. Turn the knob until the perforation between pages is just above the print head.
11.Make sure the printer cover is closed. Then turn on the printer. When the printer receives data, it begins printing automatically.
If you want to change the position where printing begins on the page, press LF/FF to advance the page to the next
To eject the paper, tear off the paper enter@ the printer; then press the LF/FF button to feed the paper forward.
Installing the Color Upgrade Kit
The optional Color Upgrade Kit (C832111) includes a color ribbon cartridge and a motor unit. Here’s how to install the kit:
1.Turn off the printer and remove the printer cover. If the original ribbon cartridge is installed, remove it. Then slide the connector cover on the printer and pull it out as shown below.
2.Install the motor unit in the right hand corner of the printer, with the gear facing the center of the printer. Push it down firmly to fit the metal pins into the slots.
3. Insert the motor unit plug into the connector on the printer.
4.Slide the print head to the middle of the printer. Remove the retaining tape from the cartridge and then slide the movable ribbon guide on the color ribbon to the center of the cartridge.
EPSON | 10/2/94 | Dot Matrix Printers |