SW |
| D@SC@tlOll | ON | ( OFF | |
| Page length (for contmuous | See Table 5 below | |||
|
|
|
| ||
1 | Tear off | 1On | 1 | off | |
/ | Auto line feed | I On | I | off | |
|
|
|
|
|
|
|
| ASCII code (hex) |
|
|
|
|
| 23 24 40 50 5C SD SE 60 78 7C 7D 7E |
|
| |
OUSA | tSe[\J^‘{:)’ | |
1 France | #Sii’cg^‘6ilb” | |
2 Germany | tSg#aua’4iaiiP | |
3 | UnitedKingdom | E $ e [ \ J A t { i } * |
4 | Denmark I |
|
5 | Sweden | #nBXUAUC&bAu |
‘3W |
| |
7 | Spam I | R s e j w i - t ,, fi I- |
DIP switch 1
Off Off On Off OffOffOffOff
111;Off On On Oif OffOllOffOff
Italy | Off | Off | On | off |
|
Spain I | Off | Off | Off | off | I |
The following eight additional sets are available only by using the ESC R software command.
Additional international character setsCOWltry
ASCII code (hex)
Character tabte | 1 | 114 | 14 | |
Italic | Set internatlonal | character sets | Off | |
| according to Table 3 above |
|
| Page length |
| 1 | 1 |
| |
| 8.5 inches (216 | mm) | I | Off | I On |
|
|
|
|
|
|
|
|
| 1 I inches (279 mm) | I off | loff | I | ||
| 11.7 inches (296 | mm) | 1 On | [ On |
| |
|
|
|
|
|
| |
| 12 Inches (305 mm) | I On | I off |
|
DIP-switch functions
This section describes all of the functions you can select with the DIP switches.
International character sets
You can change 12 characters in the italic character table to suit your printing needs. Since these characters are often used in other languages, they are named after countries and referred to as international character sets.
Select the international character set with DIP switches
The character sets you can select by DIP switch are USA, France, Germany, United Kingdom, Denmark I, Sweden, Italy, and Spain I. However, you can also select the following sets with the ESC R software command: Japan (English), Norway, Denmark II, Spain II, Latin America, Korea, and Legal.
Note: If you send the ESC t 0 command (to select italics) while DIP switch 14 is on, the international character set is always USA.
23 24 40 58 5C 5D SE 60 7B 7C 70 7E
8 Japan (English)
9Norway
10Denmark II
11 Sparn II
12Latin America
13Korea
64Legal
Character tables
Your printer has six character tables
You can select the character tables with DIP switches
Note: If you send the ESC t 1 command (to select graphics) while DIP switch 14 is off, the graphics character table is always PC 437 (United States).
Print direction
Printing is normally bidirectional. However, turning DIP switch
If DIP switch
5/93 |