Non-recommended Commands
Epson recommends against using the following commands because some of these commands are not supported in existing printers and some are duplicates of other commands.
BEL BeeperBs Backspace
DC1 select printer
Deselect printer
CAN Cancel data
EsC# Cancel MSB control
E!3< Unidirectional printing for one Iine
ESC= SetMSBtoO
ESC> SetMSBtol
ESC? Reassign
ESCA Select
ESCK Select
ESCL Select 8dot,
ESCY Select
ESCZ Select
DEL Delete character
Installation/Support Tips
Most application programs let you specify the type of printer you use so that the program can take full advantage of the printer’s features. Many of these programs provide an installation or setup section that presents a Iist of printers.
Choosing from a menu
Because Epson printers share a great many comman ds, you can use an application program even if it does not list your printer on its printer selection menu. Choose from the following list (the printers are listed in the order of preference):
If none of these printers is listed, select the first one available from the following list:
EX, FX, LX, RX, MS, Epson printer, Standard printer, Draft printer
To use aII the features of your printer, however, it is best to choose a program with your printer on its menu. If your program does not list this printer, contact the manufacturer of the software to see if an update is available.
Information Reference List
Engineering Change Notices
None.
Product Support Bulletins
None.
Technical Information Bulletins
None.
Related Documentation
| ActionPrinter 5000/5500 and |
| ActionPrinter 5000+ Service ManuaI |
LQ570+ and ActionPrinter 5000+ | |
| Parts Price List |
SPKLQ57AP5+ | |
| Self Paced Kit |
4001648 | |
4001671 | ActionPrinter 5000+ User’s Guide |
5/93 |