
Interface timing
The figure below shows the timing for the parallel interface:DATA
S T R O B E
Interface Cards
You can use optional interface boards to supplement your printer’s
C823101 | 32 KB parallel interface card |
|
|
Option Specifications
Cut-sheet feeders
Dimensions and weightPrlnter
Width | Depth | WeigM |
|
| Slngk sheets | Envelope8 |
|
Width | C806371 | 182 to 216 m m | N/A |
|
|
| (7.17 to 8.60 inches) |
|
|
| cxo6381 | 182 to 216 m m | 165 to 241 m m |
|
|
| (7.17 to 8.50 inches) | (6.60 to 9.49 Inches) |
|
|
|
|
|
|
(0.0026 to 0.0039 Inches)
Paper storage conditions:Temperature: 18” to 22°C (64” to 72OF)Humidity: 40% to 60%Environmental
Temperature:Operation 5” to 35°C (41” to 95°F) Storage:
•Envelope printing is only available with the C806381
Command Changes from ESC/P
New Commands
The following are new commands that have been added to the ESC /P command set:=(c Set page length in defined unit =(G Select graphics mode =(u Define unit=(v Set absolute vertical print positionK(” Print data as characters | |
=(c | Set page format |
=(t | Assign character table |
Single sheets:
Envelopes:
06371
Up to 50 sheets ofUp to 25 (plain bond) Up to 30 (air mail)
=tv | Set relative vertical print position |
Est. | Print raster graphics |
ESCX | Select font by pitch and point |
EWC | Set horizontal motion index |
Deleted Commands
The following commands are not supported on Epson ESC /P 2 printers:ESCb Set vertical tabs in VFU channels=/ Select vertical tab channelESCa Select justification5/93 |