Loading Single-Sheet Paper

1.First, make sure that the printer is turned OFF. Open the front lid, push the friction lever back, and pull the paper bail forward.

2.Now slide the ribbon carriage manually to the center of the printer and feed the paper into the paper slot in the top of the printer as shown below.

Friction lever

Front lid

3.When the paper won’t go any further, turn the paper feed knob to advance it (just like on a typewriter). Turn the knob until the top of the paper fits under the paper bail, then push the bail against the paper. If the paper becomes crooked, don’t worry; just pull the friction-release lever forward, straighten the paper, and push the friction lever back.

And that’s all there is to loading single-sheet paper. You’re now ready to print with your LX-90 printer. See your PIC manual for further instructions.

11