![Installation when using Y-connection](/images/new-backgrounds/140358/14035865x1.webp)
Chapter 2 Installation and Setup
12
13
14
The APD is installed.
The “InstallShield Wizard Complete” screen appears. Click the [Finish] button to finish installation.
In [Start] - [Control Panel] - [Hardware and Sound] - [Printers], check that the specified printer driver and Customer Display driver are correctly installed.
Installation when using | 2 |
|
Modular OR
USB Modular
Serial
The
The available interfaces of the computer and the TM printer are USB and serial. The TM printer and the Customer Display should be connected using the serial interface, and the modular cable of the Customer Display should be connected to the
Set 19200 bps for the communication speed for the Customer Display.
When turning on the Customer Display and the TM printer, first turn on the Customer Display, and then turn on the printer.
For information on DIP switch / Memory switch settings on the Customer Display and the TM printer, see their Technical Reference Guide supplied with your model.
33