Chapter 2 Installation and Setup
Installation and Setup
This chapter describes the procedures from the installation to execution of test print.
The uninstallation procedure (page 27) and various maintenance procedures after installation (page 51) are also provided.
•Install with Administrator privileges.
• Do not connect the TM printer, until installation of the APD completes.
•Close all running applications before the installation.
Notes on upgrading from APD 2.xx, 3.xx
APD 2.xx or 3.xx needs to be uninstalled in order to install APD 4.xx. Keep in mind the following |
|
points. |
|
• When you install APD 4.xx to a computer on which APD 2.xx or 3.xx has been installed, the | 2 |
previous version is automatically uninstalled before the installation of APD 4.xx. |
•Some printers do not support APD 4.xx. Make sure that your printer supports APD 4.xx. If you are using such printer and install APD 4.xx, the printer becomes unusable on your system.
Installation methods
The following methods are available to install the APD. |
|
• Standard Installation | page 18 |
This is a standard method to install the APD.
Use this method also when you connect the Customer Display with the
• Installation when connecting Customer Display to TM printer page 29
When you make
• Plug and Playpage 39
TM printer with USB interface can be added as a printer device on a computer on which the APD is already installed (standard or custom install).
• Custom installation | page 41 |
This allows you to select specific functions and port drivers to install the APD. | |
• Installation for sharing the printer | page 46 |
This method installs a printer to be shared (Point & Print). |
|
• Silent installation | page 57 |
This allows you to copy the APD environment to other computers. |
|
17