MENU aa
aaabc
92
93
96
97
91
90
95
94
4 ELQ
abc
a b c
MENU
Y
Exit
Y
Exit
Y
Exit
Y
Exit
*
TRACT. L. V 0
FANFOLD DIS. 0
[
Y
READY
MACRO 1
MACRO 2
MACRO 3
MACRO 4
Select
Select
Select
Select
Select
Exit
*
aa
aa
Up
Down
Offset
Offset
L or U: depending on the selected paper source
MENU aa
aaabc
a b c
MENU aa
aaabc
a b c
Printer Operation Printer Operation
2-3 2-4
Note: After pressing one of the keys the menu mode is -Top Row Keys
activated. Now the keys of the top row can only be used as cursor The Quick Macro Selection mode is entered when one of the top row keys
keys to move within the menu tree (right [Y], left [Z], up [[] and , , or is pressed. From the left to the right macro 1 to macro
down [\]). 4 will be selected. Pressing of key causes the printer to change in the
2.2.2 Detail Description of Keys
-in the printer operation state READY or BUSY
-Quick Settings (only active if not locked in the menu function
MENU ACCESS with QUICK SET OFF (see Chapter 3)).
STOP-mode and in the display appears the message MACRO 2. Pressing
key [Y] confirms the macro selection and changes the printer into the READY
or BUSY mode. After this sample the printer the message on the display is
READY 2 IPP. That means macro 2 with IBM ProPrinter emulation is
selected.
If you press one of the above described key erroneously, press for
correction.
Note: Macro selection means a change of all configuration parameters of the
macro concerned.
-Lower Row Keys
In case a certain application requires a specific vertical positioning of the
printout on a continuous form, two possibilities are provided for the READY or
BUSY mode:
-vertical position adjustment VERT.POS.ADJ. with key (90)
-fanfold displacement FANFOLD DIS with key (91).
-Vertical Position Adjustment (VERT.POS.ADJ.) (90)
This can be set differently for each macro to exactly position the printout in
relation to the top edge of the form in use. Using this function, the TOP
MARGIN and BOTTOM MARGIN settings are taken into account as well.
The parameter is part of the printer´s configuration set up memory and can
be stored with the SAVE function.
The VERT. POS.ADJ. mode can directly be called up in the status READY
or BUSY by pressing key . In this case a set up is possible for the
actually paper source of the selected macro. With TRACTOR V,
MANUAL V or BIN x V (x = 1-3) the printer asks for the value of the
actually paper source.