3Close the battery cover and slide it to the right until it clicks.

To charge the battery, connect the AC adapter as shown below. Connect the other end to the power cord, and plug it into an electrical outlet.

BATT.

Charging the Battery

After installing the battery, you need to charge it using the AC adapter. It takes about 3 hours to fully charge the battery when the P-2000 is off. It takes longer when the P-2000 is on.

The Charge light is green while the battery is being charged. When the battery is fully charged, the light turns off.

Caution:

Do not connect the AC adapter when the battery is not installed; this can damage the P-2000.

The battery status is displayed in the top right corner of the LCD screen when the P-2000 is on.

:

 

 

Battery is fully charged.

 

 

 

 

 

 

 

 

:

 

 

Battery power is about half full.

 

 

 

 

 

 

 

 

:

 

 

Battery power is low.

 

 

 

 

 

 

 

 

:

 

 

Battery power is running out. The P-2000 will shut down

 

 

 

automatically. Charge the battery using the AC adapter.

 

 

 

 

 

 

 

:

 

 

Battery is charging.

 

 

 

 

 

 

 

 

Getting Started 10