The image is not displayed.
Cause | What to do |
|
|
The image format is not | Make sure the image is a supported |
supported. | file type (JPEG or some RAW files). |
|
|
The image data is | Copy the image again. |
corrupted. |
|
|
|
The video or audio file is not | See “Supported Video Formats” or |
supported. | “Supported Audio Formats” on |
| page 28. You may be able to |
| convert your file to one of the |
| supported formats. |
|
|
The LCD is too dark. | Adjust the LCD brightness. See |
| “Adjusting the LCD Brightness” on |
| page 47. |
|
|
The USB cable is connected | No image is displayed on the LCD |
to the | when the USB cable is connected or |
| during certain operations. |
|
|
A video cable is connected | The LCD turns off when you |
to the | connect a video cable. |
|
|
A video is not displayed clearly or stops abruptly.
Cause | What to do |
|
|
The bit rate of the video is | Check the bit rate. See “Supported |
too high. | Video Formats” on page 28 for |
| details. |
Sound breaks off when the video or audio is played.
Cause | What to do |
|
|
The bit rate of the file is too | Check the bit rate. See “Supported |
high. | Video Formats” or “Supported |
| Audio Formats” on page 28 for |
| details. |
No sound comes out when a video is played.
Cause | What to do |
|
|
The Audio Codec of the file | Check the file format. See |
is not supported. | “Supported Video Formats” or |
| |
| page 28 for details. |
|
|
Maintenance and Troubleshooting 54