Battery Replacement

Your P-80 uses a nickel cadmium battery. If the red light keeps flashing after the battery has been charged, the battery has come to the end of its life and must be replaced. Nickel cadmium batteries are available through your Epson dealer.

To replace the battery, follow the steps below.

1.See that the power switch is OFF,

2.Remove the two screws on the battery holder cover at the back of the printer by using a Phillips screwdriver (Figure 2-4).

Figure 2-4.Removing the screws

3.Carefully lift the battery holder cover by placing your index fingers at the top of the cover as shown in Figure 2-5,and your thumbs underneath the ridge at the bottom of the cover.

19