Epson P07303 user manual CD5220 Standard Mode Command List

7.2 CD5220 Standard Mode Command List

Command	Code (hex)			Function description
ESC DC1	1B	11		Overwrite mode
US SOH	1F 01			Overwrite mode
ESC DC2	1B	12		Vertical scroll mode
US STX	1F 02			Vertical scroll mode
ESC DC3	1B	13		Horizontal scroll mode
US ETX	1F 03			Horizontal scroll mode
ESC Q A .. CR	1B	51 41 [n]x20 0D		Set the string display
				mode, write string to
				upper line.
ESC Q B .. CR	1B	51 42 [n]x20 0D		Set the string display
				mode, write string to
				lower line.
ESC Q D .. CR	1B	51 44 [n]xm 0D		Upper line message
	m￿40			scroll continuously
ESD [ D	1B	5B	44	Move cursor left
BS	08			Move cursor left
ESC [ C	1B	5B	43	Move cursor right
HT	09			Move cursor right
ESC [ A	1B	5B	41	Move cursor up
US LF	1F 0A			Move cursor up
ESC [ B	1B	5B	42	Move cursor down
LF	0A			Move cursor down
ESC [ H	1B	5B	48	Move cursor to home
				position
HOM	0B			Move cursor to home
				position
ESC [ L	1B	5B	4C	Move cursor to left-most
				position
CR	0D			Move cursor to left-most
				position
ESC [ R	1B	5B	52	Move cursor to right-most
				position
US CR	1F 0D			Move cursor to right-most
				position
ESC [ K	1B	5B	4B	Move cursor to bottom
				position
US B	1F 42			Move cursor to bottom
				position
ESC b [n]xC8	1B	62	[n]xC8h	Save demo message to
[m]xC8			[m]xC8h	EEPROM
				n=Line 1; m=Line 2
ESC # n	1B	23 n (n=30~37)		Command type select
US @	1F 40			Execute self test
US E n	1F 45 n			Blink display mode

(REMARK)

*While using command “ESC Q A” or “ESC Q B”, other commands can not be used except when using command “CLR” or “CAN” to change operating mode.

*When using command “ESC Q D”, the upper line message will scroll continuously until a new command is received, it will then clear the upper line and move the cursor to the upper left-end position.

16