Epson P07303 user manual Contents

	Contents
1. Features	.......................................................................................................	1
2. General Specification		2
3 Unpacking and Checking the Parts		3
4. Interface	.......................................................................................................	4
4.1	Specifications	4
4.2 The communication flow		4
4.3. Interface		5
4.3.1 Stand alone VFD Pole Display		5
5. Dip Switch and Software Setting		7
5.1	Command type selection	7
5.2	Baud rate selection	7
5.3	Parity check selection	7
5.4	Demo Mode selection	7
5.5	International character set	8
5.6	Self-test	8
5.7. Software Status Setting		9
5.7.1. Baud rate		9
5.7.2 International character set		9
5.7.3 Command type select		10
5.7.4 Reset EEPROM		11
5.7.5 Save data for demo display		11
5.7.6 Run Demo message		11
5.7.7 Set Communication parity		12
5.7.8 Show VFD Firmware Version		12
5.7.9 Save title data to EEPROM		12
6. Command List Table		13
7. Command		15
7.1. POS7300 series command set		15
7.2 CD5220 Standard Mode Command List		16
7.3	UTC standard mode command list	18
7.4	UTC enhanced mode command list	19
7.5 AEDEX mode command list		19
7.6 ADM787/788 mode command list		20
7.7	DSP-800 mode command list	20
7.8 EPSON ESC/POS command list-1		21
8. Character Set		23
8.1	International Character Sets	23
8.2	USA, Standard Character Sets (20H – 7EH)	23
8.3	Page 0 (PC437: USA, Standard Europe) (80H – FFH)	24
8.4	Page 1 (Katakana) (80H – FFH)	24
8.5	Page 2 (PC850: Mulitlingual) (80H – FFH)	24
	ii