2-14 Taking Pictures
LProof Sign-off:
K. Pipa CRE Tsutagawa
K. Pipa
CRE R. Hopley
R4C7850
Rev. C
A5 size PICTURES.FM
4/27/01 Pass 3
1. Remove the lens cap, set the dial switch to , and
press the POWER button to turn on the camera.
VIDEO CLIP appears at the top of the LCD
monitor, a white frame appears around the
previewed image, and the total available amount
of recording time is displayed at the upper-left
corner of the LCD monitor.
Note:
❏The amount of recording time available depends
on Sound setting you make in the next step, and
the amount of space available in your camera’s
memory card.
❏To use the macro feature when recording a video
clip, first turn the dial switch to and press the
button. Then set the dial switch to and
proceed to the next step.
2. To record audio with your video clip, press the
Sound button to select On. The maximum
recording time for this setting is 25 seconds.
To take a video clip with no audio, select Off.
The maximum recording time for this setting is
35 seconds.
Note:
For an explanation on using the buttons on the back of
the camera, see “Using the LCD monitor buttons” on
page 2-5.
3. Frame your subject in the LCD monitor, then
press the shutter button to begin recording the
video clip.
The amount of time remaining for recording is
displayed at the upper-left corner of the LCD
monitor. REC is displayed in red directly below
the remaining seconds to indicate that you are
recording.
4. You can stop recording a clip at any time by
pressing the shutter button again, or you can
continue recording until recording time runs out.