4-24 Making Settings
LProof Sign-off:
K. Pipa CRE Tsutagawa
K. Pipa
CRE R. Hopley
R4C7850
Rev. C
A5 size MAKESET.FM
4/27/01 Pass 3
Making settings to print an index
To make settings for printing an index of all photos
saved in the memory card, follow the steps below.
1. Select the photos you want to be included in the
index as described in the previous section.
2. Turn the dial switch to the position.
3. To make the setting for printing an index, press
the Index button to select On.
To change the setting, press the Index button
again to select Off.
Making print quality settings
You can make settings that affect the brightness and
the sharpness of the image when it is printed. First,
select the images you want to print as explained in
“Selecting images and specifying the number of
prints” on page 4-23, then follow the steps in the
appropriate section below.
Note:
❏These settings only affect the quality of the printout
when you use a printer that supports the PRINT Image
Matching system.
❏These settings do not affect the image data, or the
quality of the image when it is displayed on a computer
monitor.
1. Turn the dial switch to the position, then turn
on the camera if necessary.
2. Press the ADJUST button.
3. To change the print setting for sharpness, press
the Sharpness button. You can choose between
Std. (standard), High, and Low.
To change the print setting for brightness, press
the Brightness button. You can choose between
Std. (standard), High, and Low.
Note:
❏The brightness of the image on the LCD monitor
changes when you change the brightness setting.
This approximates the effect the setting will have
when printed by a printer that supports the
PRINT Image Matching system.
❏You can also specify the number of prints for the
selected photo by pressing the arrow buttons.
❏You can make print quality settings only for JPEG
images taken with your PhotoPC 3100Z. You
cannot make print quality settings for TIFF
images.
4. Push the BACK button to save your settings.