6.23Set Vertical Print Page Line Mode “EX” 06H 00H 00H 00H 00H 00H 14H m1

Format:

“EX” 06H 00H 00H 00H 00H 00H 14H m1

Parameters:

Parameter m1 is one byte binary code, and indicates the state as follows:

Set Vertical Print Page Line Mode

m1

Off

00H

On

01H

Reserved

02H - FFH

Function:

-The default environment vertical print page line mode is set.

-If the paper width is set previously, and the actual paper width is longer than setting, it prints vertical lines at a width of 1 dot on the horizontal position within setting paper width from the top margin position to the bottom position.

-If the paper width is not set yet, it doesn’t print.

-If parameter m1 is out of range, this command is ignored and the existing setting is maintained.

-This command is only valid in remote mode.

EPSON Imaging Technology Center

Page: 48

Revision: 1 (Date: 6/20/00)