The origin of the Y-axis is the top end of the paper for the page 1 just after feeding paper. The origin of the Y-axis after the page two is the position added page length to the origin of the page management coordinate system in the last page. In the case of cutting sheet, the top of the paper is the origin all the time, because only 1 page can be set.

The page and the page length are defined as following;

The page is the Y direction unit region including one printable region in it. If it’s the cutting sheet, only one page can be set on the paper. If it’s the roll paper, plural pages can be set on the paper.

The page length is the Y direction length on the page. If it’s the cutting sheet, the page length is the Y direction printing region length from the top margin position almost to the bottom margin position. If it’s the roll paper, the page length is the length from the top margin position on the current page to the top margin position on the next page.

The printing region of cutting sheet

EPSON Imaging Technology Center

Page: 53

Revision: 1 (Date: 6/20/00)