6.26Load Default Value “LD 00H 00H”

Format:

LD 00H 00H

Function:

-The following procedures are executed:

-The power on default environment memorized in NVRAM is loaded to default environment.

-NVRAM indicates EEPROM, DIP-SW, and ROM. The power on default environment is read from the appointed NVRAM with each setting item, and the default environment is loaded.

-However, settings by following commands are not changed by this command. (not loading)

-SM command (set the status transmitting mode)

-Baud rate setting value for the MAC serial by the BR command (set baud rate) is not initialized. (The built-in EIA-232D serial interface intended to be initialized.)

-This command is only valid in remote mode.

EPSON Imaging Technology Center

Page: 51

Revision: 1 (Date: 6/20/00)