Connecting to Video Sources

You can connect a DVD player, VCR, camcorder, laser disc player, digital camera, or any other compatible video source to your projector.

The projector supports NTSC, PAL, and SECAM, and automatically detects the video format.

A standard RCA A/V cable is included with the

1

2

projector. If your video source also has an S-video

3

4

 

jack (as shown with an S-video plug at the right),

you can use it to provide a higher quality video image. However, you’ll need an S-video cable, which may be included with your video source, or may be purchased from an electronics store or video dealer.

Follow the instructions below for your type of connection.

Connecting the RCA AV Cable

Before starting, make sure the projector and your DVD player or other video source are turned off.

1.Connect the yellow plug on one end of the AV cable to the projector’s yellow Video jack.

2.Connect the other end of the cable to the video-out jack on your video source.

note

The projector does not support TV antenna cable F connectors.

RCA AV cable

Video jack

Setting Up the Projector 15