3.Connect the AV cable to the left and right Audio jacks on the projector (insert the white plug into the L port and the red plug into the R port).

4.Connect the plugs at the other end of the cable to the audio output jacks on your video source.

Connecting S-Video

If your video source has an S-video jack, you can use it to project a higher quality video image. However, you’ll need an S-video cable, which may be included with your video source, or may be purchased.

Before starting, make sure the projector and your DVD player or other video source are turned off.

1.Insert one end of an S-video cable into the projector’s S-Videoconnector.

2.Insert the other end into the S-video output port of your video source.

S-Video cable

3.Connect the RCA AV cable to the left and right Audio jacks on the projector. (Match the red and white plugs to the red and white jacks; you won’t need to use the yellow plug.)

4.Connect the plugs at the other end of the cable to the audio output jacks on your video source.

16Setting Up the Projector