Refer to the following table for a complete description of the projector’s status lights and their meaning:
Status lights
Light | Status | Description | ||
|
|
|
|
|
|
|
| orange | The projector is in sleep mode. You can unplug it or press the Power |
|
|
|
| button to turn it on. |
|
|
|
|
|
|
|
| flashing green | The projector is warming up. Wait for the image to appear. |
|
|
|
|
|
|
|
| green | The projector is operating normally. |
|
|
|
|
|
|
|
| flashing orange | The projector is cooling down. You can’t turn it back on (and you |
|
|
|
| should not unplug it) until the light stops flashing and remains orange. |
|
|
|
|
|
|
|
| red | Power is cut off because of an internal problem. Remove the power |
|
|
|
| cord and contact EPSON for help. |
|
|
|
|
|
|
|
| red | The lamp is burned out. Replace it as described on page 54. |
|
|
|
|
|
|
|
| flashing orange | The lamp is almost burned out. Replace it as described on page 54. |
|
|
|
|
|
|
|
| flashing red | There is a problem with the lamp, power supply, fan, or circuit. If |
|
|
|
| necessary, replace the lamp as described on page 54. |
|
|
|
|
|
|
|
| flashing orange | The projector is too hot. Make sure the temperature surrounding the |
|
|
| ||
|
|
|
| projector does not exceed 104 ° F and there is plenty of space around |
|
|
|
| and under the projector for ventilation. Clean the air filter if necessary. |
|
|
|
| See page 53 for instructions. |
|
|
|
|
|
|
|
| red | The projector is overheating, which turns off the lamp automatically. |
|
|
| ||
|
|
|
| Let it cool for a few minutes, then turn it back on. Make sure there is |
|
|
|
| plenty of space around and under the projector for ventilation. If it |
|
|
|
| continues to overheat, you may need to change the air filter. See |
|
|
|
| page 53 for instructions. |
|
|
|
|
|
|
|
| flashing red | There is a problem with the cooling fan or temperature sensor. Turn |
|
|
| ||
|
|
|
| off the projector and unplug it. Contact EPSON for help. |
|
|
|
|
|
Solving Problems 61