5 - 5
C. SOFTWARE COMMANDS
Codes (HEX / CONTROL) : COMMAND NAME
(1) 09 / <HT> : Horizontal tab
(2) 0A / <LF> : Line feed with printing
(3) 0C / <FF> : Forms feed
(4) 1B 19 n / <ESC> <EM> n : Setting the amount of the
feeding at automatic paper feed
(5) 1B 1E / <ESC> <RS> : Black - white reversed printing
specification
(6) 1B 1F / <ESC> <US> : Black - white reversed printing
cancellation
(7) 1B 21 n / <ESC> “!” n : Printing mode specification
(8) 1B 25 n / <ESC> “%” n : Download character set
specification / cancellation (valid only when optional
memory is installed)
(9) 1B 26 y c1 c2 [d]k / <ESC> “&” y c1 c2 [d]k : Download
character definition (valid only when optional memory is
installed)
(10) 1B 2A m n1 n2 [d]k / <ESC> “*” m n1 n2 [d]k : Bit image
mode specification
(11) 1B 3F n / <ESC> “?” n : External registration character
deletion (valid only when optional memory is installed)
(12) 1B 32 / <ESC> “2” : 1/6 - inch line pitch setting
(13) 1B 33 n / <ESC> “3” n : Minimum - pitch - unit line pitch
setting
(14) 1B 40 / <ESC> “@” : Printer initialization
(15) 1B 41 n / <ESC> “A” n : Line spacing setting
(16) 1B 43 n / <ESC> “C” n : Page length (number of lines)
setting