7.Select FILE.

PowerRIP Fen Stylus Cdor

‘I r,rw:rai.: :kr, Ewtrv

Fast Printina Direct to Port

8.Then select OK. The program installation is now complete. PowerRIP must be registered before you can use it. Go to the section Registering your

Software.

9.When you print from an application it will ask you for a file name. You can use almost any name but you must print to C:\BIRMY directory or the drive letter where PowerRlP was installed.

Output File Name:

C:\BIRMYUOB

Note: When printing under Windows 3.11, PowerRlP does not return user operation until printing is fin- ished.

Birmy Graphics Corporation

11