Epson PRP-080 user manual Configuration, Panel LED indicators, DIP Switch Settings

4. Configuration

Printer Control Panel & Status Indication

4.1) Panel LED indicators

a.PRP-080I (Standard)

(Blue LED) The POWER light is on whenever the printer is on.

(Red LED) This indicates printer online/offline status or an error

(Button) Press the FEED button to feed roll paper.

(Button) Press the ONLINE button to set printer

ONLINE/OFFLINE

Printer Status (Red LED)

￿Red light ON: Indicates that the printer is online.

￿Red light OFF: Indicates that the printer is offline.

￿Red light flashes: Indicates the printer error(s) such as out of paper, paper jammed, or printer cover is not closed properly

b.PRP-080II (Advanced)

1.Power (POWER) LED: Green On:Power is stable Off:Power is not stable

2.Error (ERROR) LED: Red

On: Off line (except during paper feeding using the FEED button and test printing, and the error state.)

Off: Normal condition

3.Paper roll end (PAPER OUT) LED: Red On: The paper roll near end is detected. Off: Paper is loaded (Normal condition).

4.2) DIP Switch Settings

The DIP switch panel is locating at bottom of the printer as shown:

a.PRP-080I (Standard)

DIP Switch Functions:

Switch	Function	ON	OFF	Default
1	Baud Rate (*)	38400	19200	OFF
2	Auto Cutter	No	Yes	OFF
3	Color Deepness	Deeper	Normal	OFF
4	Beep	Yes	No	OFF

b. PRP-080II (Advanced)

DIP Switch Functions:

Switch	Function	ON	OFF	Default
SW-1	Select cutter	No	Yes	OFF
SW-2	Select beeper	Yes	No	OFF
SW-3	Print density	Dark	Light	OFF
SW-4	Two-byte character code	No	Yes	OFF
SW-5	Reserve			OFF
SW-6	Reserve			OFF
SW-7	Select Baud rate			OFF
SW-8	Select Baud rate			OFF

SW-7	SW-8	Baudrate(bps)
ON	ON	38400
OFF	ON	4800
ON	OFF	9600
OFF	OFF	19200

Note: Before configure the DIP switch settings, please first turn the printer power off and remove the paper roll.

(*) Baud Rate is only available for serial interface models.

-10- -11-