Getting Hooked Up

Now that all the boxes are unpacked, it’s time to put the parts together into a working system. Start with the main unit. That’s the one that looks like this:

Place it on the flat surface with the front facing you, as shown. Remove the disk drive protector sheets from the two disk drives (marked A and B) by pressing the button labelled PUSH located at the left side of each drive. When you push it, the button pops out, as does the edge of the protector sheet. Carefully pull out both sheets and save them along with the other shipping materials. Now turn the main unit around so that the back is facing you,

like so:

M O N I T O R P O R T - ,

 

DIP

SWITCHES

 

 

LIGHT PEN PORT

 

 

 

 

 

 

S P E A K E R C O N T R O L

POP-OUT

 

 

 

 

 

 

 

 

 

POWER CORD

 

 

 

 

 

PRINTER

RS - 232C

OPTION CARD

OUTLET

 

 

 

 

 

PORT

PORT

ACCESS SLOTS

-

-

-

-

 

 

 

 

 

 

 

 

 

 

 

 

To connect the components of the QX-10, you’ll use two of the outlets on the back of the main unit. The power cord connects to the large rectangular outlet on the left side, labelled CAUTION: DISCONNECT POWER BEFORE SERVICING. The round monitor outlet is where the monitor cable attaches to the main unit.

3