The power switch is on the right side of the main unit, around the corner from the power outlet. It has two positions: ON and OFF.

Important: Be sure the power switch is OFF before you hook up the QX-10.

Plug the rectangular end of the power cord into the QX-10 power receptacle on the back of the main unit and the other end into a 3-prong, l20-volt grounded wall outlet.

RECEPTACLE

Now set the monitor on top of the main unit so that the back of the monitor is also facing you.

The knob at the bottom left of the monitor controls screen brightness (you may wish to adjust this later). To the right of this control is the monitor’s socket, or port, where one end of the monitor cable connects.

4