1.Make sure that the camera is off, and then open the battery cover as shown below.
2.Insert the battery.Insert the battery into the camera until it clicks, making sure the orientation of the battery is correct.
3.Close the battery cover.Note:
❏To check the battery’s remaining charge, see “Remaining battery power” on page 21.❏If you find that your battery has run out soon after recharging it a number of times, make sure to discharge it completely before recharging it. Or, the battery’s service life has ended. In that case, replace it with a new battery.
Installing and Removing a Memory Card
You cannot take photos unless an SD memory card is installed in your camera.cCaution:❏Do not use the SD memory card with dust or lint on the terminal. If the terminal of the card is dirty, data import or export may not be executed properly.
❏Never insert or remove a memory card while the SD card access LED is being lit. Doing so may cause data in the card to be lost or damaged.
❏Avoid using or storing the card in direct sunlight, or in places that are extremely hot, humid, or dusty.
❏Keep the memory card slot cover closed while the memory card is loaded. This protects the memory card and the slot from dust and static; otherwise data on the memory card may be lost or damaged.
❏Exposure of static electric shock to the memory card may cause this product to malfunction.
Note:
To use a memory card correctly, read manuals provided with the memory card. When using other devices with a memory card, also read manuals provided with those devices.