❏The battery charger included is designed for use with this product. Use of any other battery charger could result in fire, electrical shock, or injury.
❏Use only a power source that meets the power requirements indicated on the label attached to the product. If you are not sure of the power supply specifications in your area, contact your local power company or contact our Customer Support.
❏Make sure the total amperage of all devices plugged into the power outlet does not exceed the power outlet’s ampere rating.
❏If you plan to use this product in Germany, the building installation must be protected by a 16 amp circuit breaker to provide adequate
❏Do not use a damaged or frayed battery charger.
❏If you use an extension cord with this product, make sure the total amperage of all devices plugged into the extension cord does not exceed the cord’s ampere rating.
❏Never disassemble, modify, or attempt to repair the battery charger by yourself except as specifically explained in this guide.
❏Do not use power outlets controlled by wall switches or automatic timers.
❏Do not use power outlets on the same circuit as large motors or other appliances that may cause voltage fluctuations.
❏Avoid using outlets on the same circuit as photocopiers or air conditioning systems that regularly switch on and off.
❏Position this product’s power cord so that it will not be stepped on or run over.
❏Do not place any objects on the power cord or the battery charger.
❏Keep the power cord straight at the ends and at the points where it enters the transformer.
❏The power cord should be placed to avoid abrasions, cuts, fraying, crimping, kinking, and other damage.
❏If you cannot insert the plug into the power outlet, contact an electrician.
For US and Canadian users:
Use the power cord provided or a 6 to 10 foot
When using a memory card
❏Only memory cards designed for the product’s specifications can be used.
❏The methods for using memory cards vary according to card type. Be sure to refer to the documentation included with your memory card for details.
❏Do not remove the memory card while the power switch is on.
When using the LCD
❏The LCD monitor on this product may contain a few small bright or dark spots. These are normal and do not mean that your LCD monitor is damaged in any way.
❏If the LCD monitor on this product is damaged, consult your dealer.
❏If the liquid crystal solution contained in the LCD monitor on this product leaks out and gets onto your hands, wash them thoroughly with soap and water. If it gets into your eyes, flush them immediately with water. If discomfort or vision problems remain after a thorough flushing, see a doctor immediately.
❏Only use a soft, dry cloth to clean the display. Do not use liquid or chemical cleaners.
When storing, maintaining, or transporting the camera
❏Do not store this product outdoors.