2)Print testing lines to ensure the printing head is good condition.
3)Print pictures to see whether the printing image is ok.
3、Installation Procedures:
1) First step
Put the CISS on the left side of the printer. In the meantime place all the tubes at correct position.
Pull out the small rubber plug from the air hole as above picture shown.
Place 4pcs of air filters into air holes, the thicker side is down into tank.
2）Second step: Remove cartridge
Press the ink cartridge replace | Move the |
button | replace position |
3) Third step: Set up the Continuous Ink Supply System
Replace the spring of the | open the cover of cartridge to some | Insert screwdriver into the place |
degree angle | that joint cover and |
