Epson Stylus Photo RX600
5.On the test page, select the pattern in each row with the two vertical lines most precisely printed on top of each other.
You may need to use a magnifying glass or loupe.
.
Select the number of the best pattern for each row by pressing the l and r buttons. Then press OK.
6.The next pattern number appears. Repeat step 6 for each of the remaining alignment patterns.
7.When you’re finished you see the message Head alignment completed on the LCD screen. Press OK to return to the Setup Menu.
Transporting the RX600
If you move your RX600 some distance, you need to prepare it for transportation in its original box or one of a similar size.
Caution:
To avoid damage, always leave the ink cartridges installed when transporting the RX600. Never transport or store the RX600 on its side or in a tilted or
1.Press the P On button to turn on the RX600. Wait until the scanner carriage moves to the home position (toward the left side) and the print head locks in the far right position. Then turn the RX600 off.
2.Open the scanner lid and slide the transportation lock to the 
locked position.
Caution:
Be sure to move the transportation lock back to the unlocked position after installing the RX600 in its new location.
3.Close the scanner lid.
4.Unplug the power cord from the electrical outlet. Then disconnect the USB cable from your computer.
5.Unplug the cord from the TPU connector.
6.Remove any paper from the sheet feeder and output tray, then remove the paper support.
7.Close the output tray.
8.Lift up the scanner unit.
9.Remove the orange print head lock from its storage area and install it as shown to prevent the print head from moving during transport. If you can’t find the orange print head lock, tape the print head to the case.
Caution:
Be sure to remove the orange print head lock or tape after installing the RX600 in its new location.
2/04 | Epson Stylus Photo RX600 - 17 |