Replacing an Ink Cartridge
To replace an ink cartridge using the H Ink button, follow the steps below.
Note:
The illustrations show replacement of the Cyan ink cartridge. Replace the ink cartridge appropriate to your situation.
1.Make sure that this product is on. The On light should be on, but not flashing.
2.Make sure that the document cover is closed, and then open the scanner unit.
c Caution:Do not open the scanner unit when the document cover is still open.
3.Press the H Ink button. The print head moves to the ink cartridge check position and the On light and the Ink light begins to flash. The ink cartridge indicated by the _ mark is either empty or low.
Note:
❏Do not press the H Ink button for more than three seconds. Otherwise this product starts cleaning the print head.
❏If any ink cartridge is not low or empty, the print head moves to the ink cartridge replacement position without moving to the ink cartridge check position. Proceed to step 5.
cCaution:
Do not move the print head by hand, as this
may damage this product. Always press the H Ink button to move it.
4. Press the H Ink button. |
| |
If more than one ink cartridge is empty or low, |
| |
the print head moves so that the empty or low | English | |
ink cartridge is indicated by the _ mark. This | ||
| ||
occurs each time the H Ink button is pressed until |
| |
all empty or low ink cartridges have been |
| |
indicated. |
| |
Once all of the empty or low ink cartridges have |
| |
been indicated, the print head moves to the ink |
| |
cartridge replacement position when the H Ink |
| |
button is pressed. |
|
5.For best results, shake the ink cartridge four or five times before opening the package.
6.Remove the new ink cartridge from the package.
7.Open the cartridge cover. Pinch the sides of the ink cartridge that you want to replace. Lift the cartridge out of this product and dispose of it properly. Do not take the used cartridge apart or try to refill it.
The illustration shows replacement of the cyan ink cartridge.
Replacing Ink Cartridges | 11 |