Safety Instructions
Warnings, Cautions, and Notes
wWarnings
must be followed carefully to avoid bodily injury.
cCautions
must be observed to avoid damage to your equipment.
Notes
contain important information and useful tips on the operation of your product.
Safety Instructions
Read all of the instructions in this section when setting up and using this product.
When placing this product
❏Avoid places subject to rapid changes in temperature and humidity. Also, keep this product away from direct sunlight, strong light, and heat sources.
❏Avoid places subject to dust, shocks, and vibrations.
❏Leave enough room around this product for sufficient ventilation.
❏Place this product near a wall outlet where you can easily plug in and unplug this product.
❏Place this product on a flat, stable surface that extends beyond this product base in all directions. If you place this product by the wall, leave more than 10 cm between the back of this product and the wall. This product will not operate properly if it is tilted at an angle.
❏When storing or transporting this product, do not tilt it, stand it on its side, or turn it upside down; otherwise, ink may leak from the cartridge.
When choosing a power source
❏Use only the type of power source indicated on the label on the back of this product.
❏Use only the power cord that comes with this product. Use of another cord may cause fire or electric shock.
❏This product’s power cord is for use with this product only. Use with other equipment may cause fire or electric shock.
❏Be sure your AC power cord meets the relevant local safety standards.
❏Do not use a damaged or frayed power cord.
❏If you use an extension cord with this product, make sure that the total ampere rating of the devices plugged into the extension cord does not exceed the cord’s ampere rating. Also, make sure that the total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet’s ampere rating.
❏If you plan to use this product in Germany, the building installation must be protected by a 10 or 16 amp circuit breaker to provide adequate
When handling ink cartridges
❏Do not shake the ink cartridge after removing from the package; this can cause leakage.
❏Keep the ink cartridge out of the reach of children. Do not allow children to handle it, or drink ink.
❏Be careful when you handle used ink cartridges, as there may be some ink remaining around the ink supply port. If ink gets on your skin, wash the area thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. If discomfort or vision problems remain after a thorough flushing, see a doctor immediately.
When using this product
❏Do not put your hand inside this product or touch the ink cartridges during printing.
❏Do not block or cover the openings on this product.
❏Do not attempt to service this product by yourself.
❏Unplug this product and refer servicing to qualified service personnel under the following conditions:
The power cord or plug is damaged; liquid has entered into this product; this product has been dropped or the cover damaged; this product does not operate normally or exhibits a distinct change in performance.
❏When connecting this product to a computer or other device with a cable, ensure the correct orientation of the connectors. Each connector has only one correct orientation. Inserting a connector in the wrong orientation may damage both devices connected by the cable.
❏Do not insert objects into the slots on this product.
❏Never spill liquid on this product.
❏Do not leave this product with the ink cartridges uninstalled. If it has been left with ink cartridges uninstalled for a long time, the ink remaining in the print head nozzle drys out; this product may becomes unable to print.
English
Safety Instructions | 3 |