Chapter 5 Cautions while Using the Printer

5-l

Panel Switches and Commands

n switches
J
(1) Power switch
Function
Turns the power supply on/off.
t
I

I

Note
l
The RAM is initialized after turning off
the
circuit
power supply.
l
Don’t touch the power supply switch during printing.
(2) Paper-Feed switch

Function

If this switch is pressed, paper is fed one line based on the
currently specified line spacing. If this switch is held for 200
ms or more, paper is fed as long as the switch is pressed,
and stops when the switch is released. If line spacing is set
to 0, paper is fed while the switch is pressed.
l The defined macro is executed when the switch is
pressed during the macro executing command standby
state.
l Paper is fed by operating this switch, except during
printing, an error state, and the macro executing
command standby state.
l
Paper feeding is performed even during the paper near-
end state.
Notel Paper cannot be fed when the printer cover is open.
* The paper-feed switch can be enabled or disabled
with the ESC c5 command. When this switch is disa-
bled, you cannot feed paper with the switch.
-2o-