INTRODUCTION
The TM-T6O/T6OP and the TM-T8O/T8OP are a one-station printer for ECR
and POS use which can be used for printing the results of scaling or
measuring.
The main features are as follows:
. Light and ultracompact
. High-speed printing
. low-noise thermal printing
. High reliability due to a low number of moving parts
. Maintenance such as head cleaning performed easily
l
Command protocol based on ESC/POS
TM
, a widely used standard

. Four-way

routing of the interface cable, drawer control cable, and
power cable on either side, underneath, or out the back of the case
. Easy access to the power switch on the front of the printer body;
access to both sides and the back not necessary
. Bar code printing possible using a bar code command
. 90’ character rotation possible
. Repeated operation and copy printing possible through macro definition
. Drawer control possible using the drawer-kick interface
I
Interface Paper Width
TM-T60
TM-T6OP
Serial
Parallel
60mm
TM-T80
TM-T8OP
Serial
Parallel
8Omm
Please be sure to read the instructions in this manual carefully before using your
new Epson printer.
The TM-T60 and the TM-T80 have a serial interface connector and the TM-
T6OP and TM-T8OP have a parallel interface one.
Except for the defferent roll width accommodated by the two printers, the
functions provided by the TM-T6O/T60P and the TM-T8O/T8OP are the same.
Most of the illustrations used in this operation manual show the TM-T6O/T6OP.
-ii-