waits for the paper feed switch to be
pressed.
After the paper feed switch is pressed,
the printer executes the macro once.
The printer repeats this operation n1 times.
• If this command is received while defining the macro, the
macro definition is aborted, and the definition is cleared.
• If the macro is not defined or if n1 is 0, nothing is executed.
• Paper cannot be fed with the paper feed switch while
executing the macro when n3 is 1.
Not defined.
GS :

ESC = n

Select device
< 1B >H< 3D >H< n >
0n255
Selects a device to receive data from the host computer.
- If the printer is not selected, the TM-T60P ignores all
received data until it is selected by this command.
- Each bit of n is used as follows:
Bit
Function Value
0
I
1
0
Printetr
Invalid Valid
1
Undefined
2
Undefined
3
Undefined
4
Undefined
5
Undefined
6
Undefined
7
Undefined
• Even when the printer is not selected, it may enter
the BUSY state due to printer operation.
n = 1

-50-