3-4 DIP Switches
n
Locating DIP switches
On the bottom of your printer are DIP switches that allow the printer to be set or
perform a number of different functions.
.
The switches are numbered SW-1 to SW-10 (TM-U300A/U300B) or SW-1 to SW-8
(TM-U300PA/U300PB), from left to right as shown in figure below.
.
The lists on the following page describe each switch’s function.
■
Setting the DIP switches
Follow these steps when changing DIP switch settings.
➀
Turn the printer power switch off.
➁
Flip the DIP switches using tweezers or other narrow-ended tool.
Switches are on when up and off when down.
➂
The new setting takes effect when you turn on the printer.
NOTES:
*
Always change DIP-switch settings when printer is turned off.
.
Changes made with the power on have no effect until you turn the printer off
and then on again.
19