Epson TW100 Turning Off the Picture and Sound, Freezing the Action, Using the Control Panel

EPSON PowerLite TW100 Projector

Turning Off the Picture and Sound

Press the Blank button on the remote control to darken your screen and turn off the sound. When you’re ready to resume, press Blank again.

If you don’t pause the video it continues to play even though you can’t see or hear it. When you press the Blank button again to resume, the playback does not resume at the exact point you paused it.

Note: You can make the blank screen blue, instead of black, or display the EPSON logo on the screen whenever you press the Blank button.

Freezing the Action

Press the Still button on the remote control to temporarily freeze the action on the screen. This freezes any moving images on the screen until you press the Still button again.

Like the Blank feature, the video and audio input continue while the moving images are paused, so when you press the Still button again to resume, the playback does not resume where you stopped it.

Using the Control Panel

Power button

	Help button
Source button	Aspect button
	Esc button
Menu button
	Select button
Keystone
buttons	and
	buttons
Shift button
	Pattern button

Colortune button

The following table summarizes the functions on the control panel.

Button	Function
Power	Starts or stops projection.
Help	Displays the online help menu.
Aspect	Cycles through 5 aspect ratio settings: Normal, Squeeze,
	Zoom, Through, Squeeze Through.
Esc	Stops the current function. Pressing Esc while viewing a
	menu or the online help displays the previous screen or
	menu.
Select	Displays the line menu and lets you navigate the full
(pointer	menus for changing projector settings.
button)
or	Select options in the menus and online help.
Pattern	Projects a test pattern on the screen to allow focusing
	the image and adjusting the light and dark areas.
Colortune	Cycles through color mode settings: Dynamic, Theater,
	Natural, PC, and sRGB.
Shift	Press with the Keystone buttons to correct distortion, as
	described below.
Keystone +	Corrects keystone distortion, which occurs when the
Keystone –	projector is tilted or not directly in front of the screen.
	Hold down the Shift key while pressing one of the
	Keystone buttons to correct distortion.
	You also use these buttons to scroll through the menus
	and select options.
Menu	Displays the menu for changing projector settings.
Source	When more than one device is connected to the
	projector, switches from one input source to another.

11/02 EPSON PowerLite TW100 Projector - 11