EPSON PowerLite TW100 Projector

Using the Remote Control

The remote control uses a line-of-sight infrared signal. It lets you access the projector’s features from anywhere in the room— up to 32 feet away. (This distance may be shorter if the remote control batteries are low.) If you have connected the mouse cable, you can also use the remote control as a wireless mouse.

The projector may not respond to remote control commands in these conditions:

❏You are too far away—not within 32 feet (9 meters)—or not within 30° to the left or right of the front or rear sensor or 15° above or below it

❏Batteries are weak or not installed correctly

❏Ambient light is too bright

❏A fluorescent light is shining into the infrared receiver

❏A strong light source (such as direct sunlight) shines into the infrared receiver

❏Other equipment emitting infrared energy is present (such as a radiant room heater)

The remote control buttons are shown in the following illustration.

Test Pattern button

Remote signal output

Illumination

 

button

Power button

Menu button Esc button

This table summarizes the functions on the remote control.

Button

Function

 

 

Pattern

Projects a test pattern on the screen to allow focusing

 

the image and adjusting the light and dark areas.

 

 

Power

Starts or stops the projector.

 

 

Esc

Stops the current function. Pressing Esc while viewing

 

a menu or the online help displays the previous screen

 

or menu.

 

 

Select

Displays the line menu and lets you navigate the full

(pointer button)

menus for changing projector settings.

 

 

Colortune

Cycles through color mode settings: Dynamic,

 

Theater, Natural, PC, and sRGB.

 

 

Blank

Turns off the audio and video, displaying the black,

 

blue, or EPSON logo background.

 

 

Input buttons

When more than one device is connected to the

 

projector, selects the source connected to the

 

interface on the back of the projector: S-Video, Video,

 

A, B, D-RGB, or A-RGB.

 

 

Memory

Recalls settings that have been assigned to the

buttons (1–6)

buttons through the memory function in the Video

 

menu.

 

 

Help

Displays the online help menu.

 

 

Still

Keeps the current computer or video image on the

 

screen.

 

 

Auto

Optimizes the computer image.

 

 

Aspect

Cycles through 5 aspect ratio settings: Normal,

 

Squeeze, Zoom, Through, Squeeze Through.

 

 

Menu

Displays the menu for changing projector settings.

 

 

Illumination

Illuminates the remote control buttons.

 

 

 

Select button

Aspect button

Colortune button

Auto button Blank button

Still button

Input buttons

Memory buttons

Help button

12 - EPSON PowerLite TW100 Projector

11/02