•Make sure the computer's display resolution does not exceed the projector's resolution and frequency limit. If necessary, select a different display resolution for your computer. (See your computer manual for details.)
Parent topic: Solving Image or Sound Problems
Solutions When Only a Partial Image Appears
If only a partial computer image appears, try the following solutions:
•Press the Auto button on the remote control to optimize the image signal.
•Try adjusting the image position using the Position menu setting.
•Press the Aspect button on the remote control to select a different image aspect ratio.
•If you zoomed into or out of the image using the
•Check your computer display settings to disable dual display and set the resolution within the projector's limits. (See your computer manual for details.)
•Check the resolution assigned to your presentation files to see if they are created for a different resolution than you are projecting in. (See your software help for details.)
Parent topic: Solving Image or Sound Problems
Solutions When the Image is Not Rectangular
If the projected image is not evenly rectangular, try the following solutions:
•Place the projector directly in front of the center of the screen, facing it squarely, if possible.
•If you adjusted the projector height using the projector feet, press the keystone buttons on the projector to adjust the image shape.
•Adjust the Quick Corner setting to correct the image shape.
Parent topic: Solving Image or Sound Problems
Solutions When the Image Contains Noise or Static
If the projected image seems to contain electronic interference (noise) or static, try the following solutions:
•Check the cables connecting your computer or video source to the projector. They should be:
•Separated from the power cord to prevent interference
•Securely connected at both ends
140
