Press A or B and then Enter.

If any errors occur, record the error code and message and contact your Epson dealer. Always have the floppy disk drive serviced by your Epson dealer.

Sequential seek check

This test checks the ability of the read/write heads to locate any part of the diskette. This action by a read/write head is called a seek. During this test, each head seeks sequentially from the innermost track to the outermost track. The innermost track is track 39 for 360KB diskettes and track 79 for 720KB diskettes.

Select option 1 from the menu to start this test.

The program displays the number of each track it finds. For example, with a 360KB floppy disk, the first message you see is:

Current track is 39

The track number counts down (from 39 or 79) to 0.

The seek is performed by each head, so you see the count twice. If no errors occur, the menu is displayed.

Random seek check

This test is identical to the sequential seek check, except that the seek operation is performed on each track in random order instead of sequential order.

Select option 2 from the menu to start this test.

Write, read check

This test checks the ability of the selected disk drive to read and write data from a diskette. The test writes to and reads from each cylinder on the diskette, starting at the center.

Note: This test destroys all data on the diskette in the selected drive.

Select option 3 from the menu to start this test.