Equator CM 3000 F. Cabinet Items, Theoretical Wiring Diagram Specification, Service Information

F.CABINET ITEMS

1.Magnetic catches 111 are a push-fit in front top panel 109.

2.To remove front top panel 109, remove both sliding tabletops completely (see A.1.) and magnetic catches 111. Drill out the rivet at each end of the front slide panel using a 3mm bit. Use extreme care when drilling Withdraw leg top caps 108, and then remove the front top panel assembly. Refit in reverse order.

3.Castor wheels 116 are a push-fit onto castor wheel inserts 117. The castor wheel inserts are a push-fit into the cabinet. Remove by prising out with care.

THEORETICAL WIRING DIAGRAM

SPECIFICATION

Voltage	120 V ac. 60Hz
Loading	410 W (Top 110 W, Middle 110 W, Bottom 190 W)
Cord length	2 m
Pre-heat time	30 minutes approx
Finish	See text
Dimensions (approx)	725mm W x 380mm D x 695mm H

SERVICE INFORMATION

The elements used in this appliance are of the adhesive variety and cannot be removed easily. For this reason, elements and plates are supplied as complete assemblies.

4