UNDERSTANDING FABRIC CARE LABELS

The symbols on labels of your garments will help you in choosing the suitable wash program, the right temperature, wash cycles, and ironing methods. Don’t forget to give a glance to these useful indications!

WINTERIZING YOUR WASHER

To winterize your washer please, follow the instructions below to avoid damage to your unit due to freezing:

1.With the unit off, remove wash filter. This will allow the water remaining in the pump and drain hose to be evacuated. Replace filter.

2.Close the inlet shut-off valves (provided by installer) and disconnect the inlet hoses. There should be no water in the hoses where they attach at the back of the machine.

IF ANTIFREEZE IS BEING USED IN THE SYSTEM FOLLOW THESE INSTRUCTIONS:

(Not necessary if the above drain procedure is followed)

1.When putting antifreeze into the water system of your coach, set the washer to a warm/warm fill setting and allow water to flow into unit until antifreeze is detected.

2.Advance the knob timer on “Reset”, turn on “Rinse” position and allow water to flow for 10 seconds.

3.Advance the knob timer on “Reset” and then turn again on “Spin” to remove the majority of the water from the unit.

4.With the unit off, remove wash filter from unit. This will allow the water remaining in the pump and drain hose to be evacuated. Replace filter.

5.If you elect you may close the inlet shut-off valves (provided by installer) and disconnect the inlet hoses.

6.Any water remaining in the unit should contain antifreeze and be protected from freezing.

Note: When placing unit into service allow unit to operate for one complete cycle before doing laundry to ensure all antifreeze has been purged from the unit.

If you have any further questions pertaining to this matter please contact Technical Support Toll free

at (tech@appliancedesk.com

18

Washer Owner’s Manual

Page 19
Image 19
Equator EW 620 owner manual Understanding Fabric Care Labels, Winterizing Your Washer